.svg?_=EFC2A8EF-59A7-4076-A8F2-C85526B9D006)
.svg?_=5B8B7101-D192-48CA-8139-47FA371585C2)
Information
This is a universal Packard Bell in car charger which fits a whole host of laptop manufacturers including Packard Bell, as you can see on the picture this is the Packard Bell connector which is approx. 5.5mm x 2.5mm which has a hole diameter of 2.5mm. The Universal Packard Bell car charger is designed to fit into your 12v car socket or cigarette lighter socket and then plug into your Packard Bell notebook or laptop and this Packard Bell car dc adapter also has a 2x USB ports so you can also charge a whole host of other devices such as phones or power banks.
Packard Bell car charger specification:
Model: AUTH90 USB
Output: 12V – 24V 5A (90W maximum)
Input: 12V
Input type: 12V power socket (Cigarette lighter socket)
USB output: 5V 2.4A
Connector tips 90W MAX:
M1 15V, 6*3mm (Used with Toshibas)
M2 19.5V, 4.5*4.3.0mm Small blue connector barrel with pin in centre (Used with Hp’s)
M3 16V, 6.5mm*4.4mm Connector barrel with pin in centre (Used with Sonys)
M4 18.5V, 4.8*1.7mm (Used with Hp)
M5 19V, 5.5*2.5mm (Used with Packard Bell, Lenovos, Packard Bell, Asus, Toshiba, Acer and more)
M6 19V, 5.5*3.0 Connector barrel with pin in centre (used with Samsungs)
M7 19V, 5.5*1.7mm (Used with Acer, Asus, Packard Bell, Liteon and more)
M8 19.5V, 6.5*4.4mm Connector barrel with pin in centre (Used with Sonys)
M9 19.5V, 7.4*5.0 Connector barrel with pin in centre (Used with Dells & Hps)
M10 20V, USB style Rectangle connector with pin in centre (Used with Lenovos)
M11 20V, 7.9mm*5.4mm Yellow connector barrel with pin in centre (Used with Lenovos)
M12 18.5V, 7.4*5.0mm Connector barrel with pin in centre (Used with hps)
This will not run any Packard Bell laptop over 90w so for example 19v 6.3a and higher are not supported.
Please read this:
Your original Packard Bell laptop charger needs to read no more than 19V 4.74A (90w) this is the maximum support for the car power adapter, so for example the following are popular powers outputs on Packard Bell notebooks and laptops and are all compatible
19V 2.1A
19V 2.37A
19V 3.42A
19V 4.74A
If you are not sure on the information given about this Packard Bell in car charger and if it will work with your model of notebook, simply contact us to check for you.
Packard Bell car charger specification:
Model: AUTH90 USB
Output: 12V – 24V 5A (90W maximum)
Input: 12V
Input type: 12V power socket (Cigarette lighter socket)
USB output: 5V 2.4A
Connector tips 90W MAX:
M1 15V, 6*3mm (Used with Toshibas)
M2 19.5V, 4.5*4.3.0mm Small blue connector barrel with pin in centre (Used with Hp’s)
M3 16V, 6.5mm*4.4mm Connector barrel with pin in centre (Used with Sonys)
M4 18.5V, 4.8*1.7mm (Used with Hp)
M5 19V, 5.5*2.5mm (Used with Packard Bell, Lenovos, Packard Bell, Asus, Toshiba, Acer and more)
M6 19V, 5.5*3.0 Connector barrel with pin in centre (used with Samsungs)
M7 19V, 5.5*1.7mm (Used with Acer, Asus, Packard Bell, Liteon and more)
M8 19.5V, 6.5*4.4mm Connector barrel with pin in centre (Used with Sonys)
M9 19.5V, 7.4*5.0 Connector barrel with pin in centre (Used with Dells & Hps)
M10 20V, USB style Rectangle connector with pin in centre (Used with Lenovos)
M11 20V, 7.9mm*5.4mm Yellow connector barrel with pin in centre (Used with Lenovos)
M12 18.5V, 7.4*5.0mm Connector barrel with pin in centre (Used with hps)
This will not run any Packard Bell laptop over 90w so for example 19v 6.3a and higher are not supported.
Please read this:
Your original Packard Bell laptop charger needs to read no more than 19V 4.74A (90w) this is the maximum support for the car power adapter, so for example the following are popular powers outputs on Packard Bell notebooks and laptops and are all compatible
19V 2.1A
19V 2.37A
19V 3.42A
19V 4.74A
If you are not sure on the information given about this Packard Bell in car charger and if it will work with your model of notebook, simply contact us to check for you.
Specifications
-
MPN:
-
Brand:UNIVERSAL
-
Condition:New
-
Product Code:UNICAR2